< >
  • Coated Ascorbic Acid 97% DC(HPMC)

    Coated Ascorbic Acid 97% DC consists of ascorbic acid coated with HPMC. It is white to pale yellow micro-crystalline powder. We have ascorbic acid powder,ascorbic acid pills etc. EAFOOD is a professional manufacturer and wholesaler of Coated Ascorbic Acid and a Private Label / OEM supplier.

    PRODUCT DESCRIPTION

    Coated Ascorbic Acid 97% DC consists of ascorbic acid coated with HPMC. It is white to pale yellow micro-crystalline powder.


    PRODUCT IDENTIFICATION

    Chemical names: (5R)-5-[(1S)-1, 2-Dihydroxyethyl]-3, 4-dihydroxyfuran-2(5H)-one.

    Synonyms: L-ascorbic acid; L-xylo-ascorbic acid; L-(+)-ascorbic acid; vitamin C

    CAS No.: 50-81-7

    Einecs-No: 200-066-2

    Empirical formula: C6H8O6

    Molecular mass: 176.13 g/mol

    Coated Ascorbic Acid 97% DC(HPMC)Coated Ascorbic Acid 97% DC(HPMC)


    PACKAGE

    Net 25kg per paper carton, cartons are packed on pallets.

    Coated Ascorbic Acid 97% DC(HPMC)Coated Ascorbic Acid 97% DC(HPMC)

    SOLUBILITY

    Coated Ascorbic Acid is slightly soluble in water.


    STABILITY AND STORAGE

    Coated Ascorbic Acid is fairly stable to air if protected from humidity, but is somewhat sensitive to heat. The product may be stored for at least 24 months from the date of manufacture when the unopened original container and at room temperature below 25℃. On prolonged storage, a slight yellow discoloration may occur which, however, does not affect the biological activity.


    USES

    Coated Ascorbic Acid is used for the enrichment, standardization or stabilization of dry food preparations .


    REGULATORY STATUS

    Generally approved for the intended use.


    SAFETY

    Coated Ascorbic Acid is safe for the intended use. Avoid ingestion, inhalation of dust or direct contact by applying suitable protective measures and personal hygiene. For full safety information and necessary precautions, please refer to the respective Material Safety Data Sheet.


    Coated Ascorbic Acid 97% DC(HPMC)


    SPECIFICATIONS

    Item Standard
    Appearance White to pale yellow micro-crystalline powder
    Identity for ascorbic acid Corresponds
    Loss on drying Max.0.5%
    Ascorbic Acid Content 97%
    Sulphated ash (residue on ignition) Max.0.1%
    Heavy metals Max.20ppm
    Lead Max.3ppm
    Cadmium Max.1ppm
    Mercury Max.0.1ppm
    Total plate count ≤ 1000 CFU/g
    Total molds yeasts ≤ 100 CFU/g
    Coliform organisms Negative
    Particle Size More than 98% pass through 20 mesh
















    Top {ls_onlines} {ls_statistics}